Ascaso Factory | Espresso coffee machines manufactured in Barcelona |

T-Tech

stainless steel & multi-GROUPS

water/steam

components

electronics

main features

Contents

Multi group system
Termal stability
Energy efficiency

T-Tech

Multi-group system

Thermal Stability System

The filtered and clean water enters the machine through the rotary pump at a certain pressure.

Enter the water/steam boiler through a U-shaped preheater tube (thick and 100% Aisi 316 L stainless steel), at network or ambient temperature. And it comes out hot without touching or altering the water in the water boiler. A very efficient system (no need to use any additional energy to preheat the water entering the groups).

Hot water (80º) will enter each thermodynamic coffee group.

The coffee group (see technology group T) and the algorithm established in the electronic exchange, guarantee a great thermal stability of the water at the exit of the group (+ - 0.5ºC). Both in situations of continuous or timely consumption.

And all this without constantly reheating the water or having saturated groups of water. Clean water in each coffee at a constant temperature. With a much more efficient and sustainable technology.

Multi-group (separate) technology with PID control.

Minimal metal migration to the beverage through the use of stainless steel.

Freshly Delivered Water.

Energy efficiency.

Energy efficiency

We guarantee a saving 50% compared to a single boiler traditional coffee machine.

Use of electronically controlled thermoblocks focused on conserving energy by heating the extraction water only.
Electronic temperature management. The heating element only operates when necessary and only for as long as required. It allows ‘smart’ control, with a much lower energy consumption than other systems on the market.
PID Control in all the coffee groups and the steam boiler. Featuring electronic thermostats that are much more precise and act much faster than the traditional mechanical pressure gauge system.
The Multi-Group System means that power is only used by the part of the machine in use at any time. Each group can be turned off or on independently.
Thermal lagging made from high-tech material for coffee and steam boilers. Notably increases the quality of the coffee machine and the energy-efficient.

Energy consumption

Reducing the energy consumption of our coffee machines has been a priority goal for the last 10 years. The result of this process is the creation of our own technology, in a sector that primarily uses technologies from 60 years or 20 years ago, as in the case of the most popular and modern multi-boiler technologies.

We want to make public our result and, we hope, that many other manufacturers will follow this path. The result obtained, available to our clients, is based on the European protocol.

A step beyond the European Standards

It would be advisable to publish the actual consumption of professional coffee machines, which is based on the European standard DIN 18873 - 2: 2016. It is a sign of transparency that fosters the consumer and the energy transition, but we believe that this data does not reflect consumption in real conditions.

How is it tested according to official protocol?

New machines are tested under laboratory conditions. In reality, after a period of use, copper boiler machines accumulate a large amount of lime, causing an increase in energy consumption when in use. This does not happen in stainless-steel boilers of Ascaso coffee machines.

It is not considered that a group/ groups and the boiler cannot be turned off in a mono-boiler machine, which is indeed feasible with our T technology resulting in the corresponding energy savings.

Time required to activate or switch on the coffee group is not evaluated either. Ascaso's T technology enables a group to be activated when it is completely switched off in 1 minute. It is a unique design in the world.

European regulations foster that all manufacturers have the same protocol to measure energy consumption, but considering the tests carried out and the methodology, it does not accurately reflect efficiency and performance. In real working conditions, our technology and materials improve the data obtained according to the official protocol of European Standards.

Energy savings = Economic savings

The energy consumption of a professional coffee machine is high. Also it is its hours of use. Consequently, financial savings are also important.

By doing a simple calculation, we can obtain an annual saving of more than € 300 on the electricity bill.

Average saving 5.5 kWh/24h. 300 days of annual opening. 0.21 kWh (average price in Europe).

Total: € 350 / year.

Curious data

We can translate the energy request of those models into CO2 generation due to the energy being used to. Considering each 1.000 kWh being used generate 458 kg of CO2, or which is equivalent, to cut 19 trees.

Translating data to those 2 parameters shows results as follows:

	BARISTA T PLUS 2GR	HX MONOBOILER 2 GR
Annual energy request	1.413,00 kWh	2.838,00 kWh
Generation of co2	647,15 kg	1.299,80 kg
Cutted trees	26,85 Trees	53,92Trees

Also considering energy request differences between models and base HX one, can also try to translate these differences into something common for all of us, for example the energy request of a fridge. Considering the annual energy request of a fridge is around 175 kWh, the differences between the BT model and the HX mono boiler would allow user to completely cover the energy request of this appliance, as follows:

	BARISTA T PLUS 2GR	HX MONOBOILER 2 GR
Difference annual energy request	1.425,00 kWh	2.838,00 kWh
Free fridges per year	8,14	-